TM 10-3930-664-24 2-71.  TRANSMISSION OIL TEMPERATURE SENDER REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Batteries disconnected (para.  2-78) Materials / Parts: Loctite 242 (20, App.  C) A.  REMOVAL WARNING Electrical  shock  hazard.    Disconnect battery ground cable or power source prior to working on electrical components.  Failure to heed warning could cause shock, injury or death.  If electrical    shock    occurs,    administer first aid and  seek  medical  assistance immediately. 1. Remove top transmission cover (1) by removing nine screws (2) and washers (3). 2. Tag and disconnect electrical wire from transmission oil temperature sender (4). 3. Remove transmission oil temperature sender (4) from transmission (5). B.  CLEANING Clean transmission oil temperature sender in accordance with paragraph 1-24. C.  INSPECTION Inspect sender and related components in accordance with paragraph 1-24. 2-210