TM 10-3930-664-24 2-66. STOP AND BLACKOUT TAILLIGHT REPLACEMENT (COMPOSITE LIGHTS) This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Batteries disconnected (para.  2-78) Materials / Parts: Loctite 242 (20, App.  C) A. REMOVAL WARNING Electrical   shock   hazard.      Disconnect   battery   ground cable   or   power   source   prior   to   working   on   electrical components.      Failure   to   heed   warning   could   cause shock,    injury    or    death.        If    electrical    shock    occurs, administer     first     aid     and     seek     medical     assistance immediately. 1. REMOVE RIGHT REAR COMPOSITE LIGHT ASSEMBLY (1). a. Tag      and      disconnect      electrical      wires   from composite light assembly (1) located in right rear light box (2). b. Remove  composite light assembly (1) from right rear light box (2) by removing two screws (3). 2. REPEAT STEP 1 FOR LEFT REAR COMPOSITE LIGHT ASSEMBLY. 2-198