| |
TM 10-3930-664-24
2-56. ALTERNATOR PULLEY REPLACEMENT
This task covers: Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools and Test Equipment:
Equipment Condition:
General Mechanics Tool Kit (1, App. E)
Drive belt removed (para. 2-54)
Torque Wrench (32, App. E)
Strap Wrench (47, App. E)
Puller Kit (26, App. E)
A. REMOVAL
1.
Using strap wrench to hold pulley (4), remove
nut (I) and spring washer (2).
2.
Using puller, remove retainer (3) and pulley (4)
from alternator (5).
B. CLEANING
Clean pulley and exterior of alternator in accordance with
paragraph 1-24.
C. INSPECTION
Inspect components in accordance with paragraph 1-24.
D. INSTALLATION
1.
Install pulley (4) onto alternator (5). Secure
using retainer (3).
2.
Install new spring washer (2) and nut (1).
FOLLOW-ON MAINTENANCE:
Install drive belt (para. 2-54)
END OF TASK
2-171
|
