TM 10-3930-664-24 NOTE Place  drain  pan beneath thermostat components  during  removal  to  catch residual fluids. 3. REMOVE THERMOSTAT HOUSING (6) AND THERMOSTAT (11). a. Remove      thermostat   housing   (6)   from   engine block by removing two screws (7) and screw (8). b. Remove        lifting    bracket    (9).        Remove    and discard gasket (10). NOTE Ensure    that    all    gasket    material    is removed from housing and bracket. c. Remove  thermostat  (11)  from  inside  of  housing (6). d. Remove    alternator    support    (12)  by  removing screws (13). B.  CLEANING CLEAN THERMOSTAT COMPONENTS IN ACCORDANCE WITH PARAGRAPH 1-24. C.  INSPECTION 1. INSPECT COMPONENTS IN ACCORDANCE WITH PARAGRAPH 1-24. 2-155