TM 10-3930-664-24 2-43.  ACCELERATOR SLAVE CYLINDER REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Towbar lowered (para.  2-126) Drain Pan (10, App.  E) A.  REMOVAL 1. RELEASE HOOD   ASSEMBLY (2)  BY LIFTING HANDLE (1).  OPEN HOOD ASSEMBLY. 2. PLACE DRAIN PAN BENEATH CYLINDER ELBOW (4).  DISCONNECT HOSE (3) FROM ELBOW.  CAP HOSE END. 4. REMOVE  ACCELERATOR  SLAVE  CYLINDER  (5) FROM BRACKET (7) AND MOUNT  (12).  REMOVE BRACKET  AND MOUNT AS REQUIRED. a. Remove bracket (7) from fuel pump control lever (8)  by  removing  shoulder  bolt  (9),  washer  (10), and nut (11). b. Release    accelerator    slave    cylinder    (5)    from bracket  (7)  by  loosening  nut  (6)  and  removing threaded cylinder rod from bracket. c. Remove    accelerator    slave    cylinder    (5)    from throttle   mount   (12)   by   removing   screw   (13), washers (14), nut (15) and locknut (16). d. Remove     elbow     (4)     from     accelerator     slave cylinder (5). e. Remove  mount  (12)  from  engine  by  removing screws (17). B.  CLEANING Clean components in accordance with paragraph 1-24. 2-138