TM 10-3930-664-24 3.     Loosen  clamps  (7).    Remove  air  inlet  tube  (6)  from air inlet elbows. 4.     Loosen clamp (9) and remove air inlet elbow (8) from air cleaner (13). 5.     Loosen  clamp  (11)  and  remove  air  inlet  elbow  (12) from engine manifold (10). B.  CLEANING Clean   air   inlet   tube   and   fittings   in   accordance   with paragraph 1-24. C.  INSPECTION Inspect  tube  and  elbows  for  cracks  and  splits.    Inspect clamps for proper operation. D.  INSTALLATION 1.     Install  short  leg  of  air  inlet  elbow  (12)  onto  engine manifold (10).  Secure using clamp (11). 2.     Install short leg of air inlet elbow (8) onto air cleaner (13).  Secure using clamp (9). 3.     Mate  air  inlet  tube  (6)  to  air  inlet  elbows  (8,   12). Secure using clamps (7). 4.     Apply  loctite  to  threads  of  nine  screws  (4).    Install transmission  top  cover  (3)  and  secure  with  screws and washers (5). 5. Close hood assembly (2).  Ensure handle (1) is fully engaged. FOLLOW-ON MAINTENANCE: Raise towbar and lock in position (para.  2-126) END OF TASK 2-117