TM 10-3930-664-24 2-32.   EVACUATOR VALVE REPLACEMENT This task covers:  Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.   E) A.   REMOVAL 1.     Open access door (1) located on left side transmission cover by rotating handle (2) counterclockwise. 2.     Remove  evacuator  valve  (4)  from  air  cleaner  (5)  by loosening clamp (3). B.  CLEANING Clean  evacuator  valve  in  accordance  with  paragraph  1- 24. C.  INSPECTION Inspect evacuator valve for obvious damage.  Replace if damaged. D.  INSTALLATION 1.     Install  evacuator  valve  (4)  onto  air  cleaner  (5)  and secure using clamp (3). 2.     Close access door (1) and secure by rotating handle (2) clockwise until fully engaged. FOLLOW-ON MAINTENANCE: None END OF TASK 2-115