| |
TM 10-3930-664-24
2-30. AIR RESTRICTION INDICATOR REPLACEMENT
This task covers: Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools and Test Equipment:
Materials / Parts:
General Mechanics Tool Kit (1, App. E)
Loctite 242 (20, App. C)
A. REMOVAL
NOTE
Air
restriction
indicator
can
be
removed
without
removing
transmission top cover. Remove
cover only if nipple, elbow, or hose
replacement is required.
1. Unscrew air restriction indicator (1) from pipe nipple
(2). Remove pipe nipple from elbow (3).
2. Remove elbow (3) from welded pipe coupling (4).
Plug pipe coupling.
3. If required, remove transmission cover top (5) from
cover frame and transmission side plates by
removing nine screws (6) and washers (7).
4. Tag and disconnect hose assembly (8) from elbow
(9). Remove elbow and indicator adapter (10) from
welded pipe coupling (4).
B. CLEANING
Clean
air
restriction
indicator
and
associated
components in accordance with paragraph 1-24.
2-111
|
