TM 10-3930-664-24 3.     Disconnect  hose   (6)   from   compression   elbow   (7). Remove elbow. 4.     Loosen hose clamp (8) to release air inlet elbow (9) from air cleaner assembly (10). 5.    Remove   four   P-clamps   (11,   12)   by   removing   two screws (13) and washer (14). 6.     Remove  P-clamp  (15)  by  removing  screw  (16)  and washer (17). 7.     Remove air cleaner assembly (10) from engine (19) by removing screws (18). 8.     Loosen  clamp  (20)  to  remove  evacuator  valve  (21) from air cleaner (22). 9.     Remove air inlet cap (23) from air cleaner (22). 10.  Release  air  cleaner  (22)  from  mounting  bands  (24) by  removing  screws  (25),  washers   (26),   and   nuts (27).   Slide air cleaner out  of mounting bands. 11.  Remove    screws    (28)    and    nuts    (29)    to    release mounting bands (24) from mount (30). B.  CLEANING    Clean   exterior   of   air   cleaner   assembly   in   accordance with paragraph 1-24. C.  INSPECTION Inspect air cleaner, mounting bracket, and air inlet fittings in accordance with paragraph 1-24. 2-106