TM 10-3930-664-24 D.  INSTALLATION 1.     Install adapter (8) onto transfer pump (5). 2.     Position  new  gasket  (7)  and  transfer  pump  (5)  onto engine and secure using screws (6). 3.     Torque screws (6) to 18 ft-lbs (24 Nm). 4.     Connect fuel lines (3, 4). 5.     Loosen hose assembly (9) to bleed low pressure fuel line. 6.     Operate   transfer   pump   hand   lever   (10)   until   fuel flowing from screw fitting is free of air. 7.     Tighten hose assembly (9). 8.     Close hood assembly (2).  Ensure handle (1) is fully engaged. FOLLOW-ON MAINTENANCE: Raise towbar and lock in position (para.  2-126) END OF TASK 2-94