TM 10-3930-664-24 2-23.  EXHAUST MANIFOLD REPLACEMENT This task covers:  Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Towbar lowered (para.  2-126) Torque Wrench (32, App.  E) Materials / Parts: Gasket, Item 6 (1 ea.) Gasket, Item 8 (4 ea.) A.  REMOVAL WARNING Significant burn hazard exists.  Allow engine   to   cool   before   you   perform maintenance on the exhaust manifold.    Do  not  touch  hot  exhaust system   with   bare   hands;   injury   will result.      If   necessary,   use   insulated pads and gloves. 1.     RELEASE    HOOD    ASSEMBLY    (2)    BY    LIFTING HANDLE (1).  OPEN HOOD ASSEMBLY. 2.     REMOVE    EXHAUST    PIPE    (3)    AND    EXHAUST MANIFOLD (4). a. Remove exhaust pipe (3) from exhaust manifold (4) by removing screws (5). b. Remove and discard gasket (6). c. Remove  exhaust  manifold  (4)  from engine by removing   screws   (7).      Remove   and   discard gaskets (8). 2-88