| |
TM 10-3930-664-24
5. Remove tube (4) from tube end (8). Disconnect
short tube section (9).
B. CLEANING
Clean oil level dipstick components in accordance with
paragraph 1-24.
C. INSPECTION Inspect dipstick and related compo-
nents in accordance with paragraph 1-24.
D. INSTALLATION
1.
Install tube (4) onto tube end (8). Connect short tube
section (9).
2.
Push
tube
(4)
through
hole
at
left
side
of
transmission side panel. Secure using clamp (6)
and screw (7).
3. Fasten tube (4) using hose clamp (5).
4. Slide oil level dipstick (3) into tube (4).
5. Close hood assembly (2). Ensure handle (1) is fully
engaged.
FOLLOW-ON MAINTENANCE:
Service engine oil in accordance with Lubrication
Order Raise towbar and lock in position (para. 2-
126)
END OF TASK
2-85
|
