TM 10-3930-664-10 NOTE If engine cannot be started, parking brake must be released manually be removing the cap screw which attaches the parking brake cylinder rod to the parking brake cylinder mount. j. Start engine and disengage the parking brake by placing PARK BRAKE switch to OFF. k. Install park brake lockout on top of park brake cylinder mount. I. Stop engine and place steering selector valve handle to the center position for two wheel steering. m. Push REAR AXLE DISCONNECT handle downward to disengage the rear axle for towing. WARNING Do not tow forklift truck in excess of 35 mph. n. Proceed to tow with caution. o. After towing of the 4KRTFL is completed, use the following procedures to place the vehicle back into operation. 2-52