TM 10-3930-664-10 d. Steering System Synchronization.  Use the following procedure to align the front and rear wheels if the wheels are not set in the same direction after you change steering modes. (1) Move the steering select lever to the forward position for 4 wheel steer. (2) Align  the  rear  wheels  in  a  straight  ahead  position  using  the  steering  wheel  and  the  wheel  alignment indicator mounted on the left end of the rear axle. Wheel  alignment-indicator  is  visible  through  notch  in  the  left  rear  fender.    Wheels  are  in  straight  ahead position  when  the  front  edge  of  block  on  the  wheel  alignment  pointer  attached  to  the  left  planetary  hub aligns with the front edge of the wheel alignment indicator attached to the axle. (3) Move the steering select lever to the center position for 2 wheel steer. (4) Use the steering wheel and adjust the front wheels to a straight ahead position. (5) Move the steering select lever to the desired mode for continued operation. 2-13. STOPPING THE FORKLIFT a. Release the accelerator pedal NOTE DO NOT pump the service brake and inching pedal while braking.  Apply an even, steady pressure to the pedal to operate brakes. b. Depress the service brake and inching pedal to apply the brakes and slow the 4KRTFL down. c. Bring the 4KRTFL to a complete stop. 2-35