TM 10-3930-664-10 CHAPTER 2 OPERATING INSTRUCTIONS SECTION I Description And Use Of Operator’s Controls And Indicators 2-1. OPERATOR’S CONTROLS AND INDICATORS This section locates, describes, and illustrates the controls and indicators used on the 4KRTFL. 2-2. INSTRUMENT PANEL a. Controls Key Control or Indicator Function 1 Travel and Range Select Lever Controls the direction and speed of travel.  Move the lever  to the center position for neutral.  Lever must be in neutral to start engine.  Move the lever up to travel forward.  Move the lever down to travel in reverse.  Move the lever to position F1 or R1 for highest torque and pulling power.  Move the lever to position F2 or R2 for normal speed conditions.  Move the lever to position F3 or R3 for highest ground speed. NOTE · The following switch is installed only in Model MHE-271. 2 Windshield Wiper Switch Controls the operation of the front and rear windshield wipers. 2-1