TM 10-3930-660-34 3-5. ENGINE LIFTING BRACKETS- REPLACE This task covers: a. Removal b. Cleaning c. Inspection d. Installation Initial Setup Tools Materials/Parts Tool Kit ,Automotive Mechanics Loctite 242 (App. B, Item 41) Equipment Condition Thermostat removed, TM10-3930-660-20. NOTE "Front" and "rear" engine references used in this paragraph are relative to the front and rear of the vehicle, with engine mounted in the vehicle. The fan side of the engine is designated the rear of the engine, and the flywheel end of engine is identified as the front of the engine. REMOVAL 1. REMOVE ENGINE REAR LIFTING BRACKET (1). 2. REMOVE ENGINE FRONT LIFTING BRACKET (3). Remove two capscrews (2) and front lifting bracket (3). CLEANING See Cleaning Instructions, para. 2-10. INSPECTION See Inspection Instructions, para. 2-11. INSTALLATION 1. INSTALL ENGINE FRONT LIFTING BRACKET (3). NOTE Apply Loctite 242 to capscrews (2) as installed. Install front lifting bracket (3) and two capscrews (2).Tighten capscrews (2) to 57 lb.ft. 2. ASSEMBLE ENGINE REAR LIFTING BRACKET (1) TO ENGINE,THEN INSTALL THERMOSTAT,TM10-3930-660-20. 3-29