TM 10-3930-660-34 3-4. ENGINE  MOUNTS REPLACE (Cont’d) b. Install two capscrews (14),new rebound washers (13) and nuts (12). c. Install capscrew (10),new rebound washer (9) and nut (8). d. Tighten three nuts (8 and 12) to 307 lb. ft. e. Remove lifting chains from engine and forklift truck. Back forklift truck away from vehicle. 4. INSTALL STARTER RELAY (3) AND CONNECT ELECTRICAL LEADS. a. Install starter relay onto left front engine mount (15) with two capscrews (6),washers (7),new lockwashers (5) and nuts (4). Connect relay ground lead under lockwasher (5). b. Correctly connect electrical leads to starter relay (3). 5. IF TRANSMISSION INPUT SHAFT WAS DISCONNECTED, CONNECT SHAFT, TM10-3930-660-20. 6. INSTALL MUFFLER, TM10-3930-660-20. 7. INSTALL RADIATOR, TM10-3930-660-20. 8. INSTALL ENGINE COVERS, TM10-3930-660-20. 3-28