TM10-3930-660-34 16-19.   MLRS ATTACHMENT CYLINDER - REPAIR (Cont’d) ASSEMBLY NOTE Wipe all sealing surfaces on cylinder clean and dry.  Apply film of clean hydraulic oil to all seals as they are installed. 1. ASSEMBLE CYLINDER PARTS (1-24). a. Press bushing (24) in rod (8). b. Install two snap rings (23) on bushing (24). c. Install seal (21) and rod wiper (22) inside gland (9). d. If removal was necessary, install lock pellet (20). e. Install backup ring (19) and new O-ring (11) on outside diameter of gland (9). f. Slide gland (9) and washer (18) onto rod (8). g. Lubricate piston (16) inner diameter with clean hydraulic oil.  Install new O-ring (17) inside bore of piston (16). h. Use a cleaning solvent and lint free rag to clean threads on rod (8) and nut (14). i. Slide piston (16) and washer (15) onto rod (8). j. Apply Loctite #271 on threads of rod (8) and nut (14).  Install nut (14) on rod (8). 16-125