| |
TM10-3930-660-34
16-14. WEAR PADS - REPLACE (Contd)
b.
Remove and discard inserts (4) with worn
wear pad(s).
CLEANING
See Cleaning Instructions, para. 2-10.
INSPECTION
See Inspection Instructions, para. 2-11.
INSTALLATION
1.
INSTALL WEAR PAD(S).
a.
Install new inserts (4) in wear pads.
b.
Apply Loctite %242 on threads of
capscrews (1).
c.
Install capscrews (1), new lockwashers (2),
flatwashers (3), shims, spacers and wear
pads. Torque capscrews to 30 lb. ft.
NOTE
Check for proper clearances between wear pads and
boom sections during assembly. A total gap of 0.01 to
0.13 inch is allowed in both vertical and horizontal
directions.
2.
ASSEMBLE INNER AND INTERMEDIATE
BOOMS AS NECESSARY, PARAS. 16-12.1
AND 16-12.2.
16-93
|