TM10-3930-660-34 16-12.2. INTERMEDIATE BOOK - REPLACE/BEPAIR (Cont’d) NOTE Shims (9 and 10) are used as required. Install same quantity of shims (9 and 10) as noted during removal. a.  Position wear pads (8),  shims (9 and 10),  and wear pad inserts (11),  between outer boom (2)., and intermediate boom (1). Chamfered side of wear pad (8) must be facing towards intermediate boom (1).  Widest portion of wear pad (8) must be facing towards bottom of outer boom (2). b.  Apply Loctite 242 to capscrews (12).  Secure wear pad assemblies (parts 8-11) to outer boom (2) with flatwashers (14),  new lockwashers (13), and capscrews (12).  Torque capscrews (12) to 30 lb.  ft. 4. INSTALL TWO UPPER WEAR PAD ASSEMBLIES (PARTS 3-4) AT FRONT OF OUTER BOOM (2). a.  Position wear pads (3) and wear pad inserts (4) between outer boom (2) and intermediate boom (1).    Chamfered  side  of  wear  pad  (3)  must  be facing  towards  intermediate  boom  (1).    Widest portion  of  wear  pad  (3)  must  be  facing  towards outside of outer boom (2). b.  Apply Loctite 242 to capscrews (5).  Secure wear pad  assemblies  (parts  3-4)  with  flatwashers  (7), new    lockwashers    (6),        and    capscrews    (5). Torque capscrews (5) to 30 lb.  ft. 16-78