| |
TM10-3930-660-34
16-9. FRAME TILT CYLINDER - REPAIR
This task covers:
a. Disassembly
b. Cleaning
c. Inspection
d. Assembly
INITIAL SETUP:
Tools
Materials/Parts
Tool Kit, Automotive Mechanics
Container
Dry Cleaning Solvent P-D-680 (App.B,
Shop Equipment, Automotive
Item 48)
Maintenance, Common #2
Hydraulic Oil (App.B, Item 35)
Less Power
Lint-Free Rags (App.B, Item 38)
Loctite #271 (App.B, Item 43)
Wrench Set, Spanner, Consisting of
Nut (14)
the following:
O-rings (5, 6, 7, 11, 16)
Spanner Wrench, Frame Tilt Cylinder;
Seal (13)
Spanner Wrench, Carriage Tilt and
Attachment Hoist;
Spanner Wrench, Fork Sideshift
Cylinder - Outer Gland;
Spanner Wrench, Fork Sideshift
Cylinder - Outer Piston;
Spanner Wrench, Boom Lift Cylinder
and Boom Extend Cylinder
Equipment Condition
Frame tilt cylinder removed,
TM10-3930-660-20.
DISASSEMBLY
1.
USE A VISE WITH SOFT JAWS TO SECURE
CYLINDER IN A HORIZONTAL POSITION FOR
DISASSEMBLY.
WARNING
Hydraulic oil, under pressure, can remain within cylinder
after disconnecting hydraulic hoses. To avoid severe
personal injury, slowly loosen counterbalance valve (1)
and allow pressure to escape before removing valve
entirely.
16-37
|