TM10-3930-660-34 16-3.  TANDEM GEAR PUKP - REPAIR (Cont’d) d. Remove  gear  housing  (6).    Dowel  pins  (17) will  remain  in  gear  housing  (6)  or  bearing  carrier (18).  Do not remove dowel pins (17). e. Remove   and   discard   two   seals   (19)   from gear housing (6). 4. REMOVE BEARING CARRIER (18) AND OTHER PARTS (22-28). a.   Pry off bearing carrier (18). Dowel pins (20) will remain in either bearing carrier (18) or gear housing (21).  Do not  remove  dowel pins (20). b.   Remove connecting shaft (22). c.    Remove thrust plate (23).  Remove and discard seal (24), two seals (25), and two seals (26). 16-12