TM10-3930-660-34 12-5.  STEERING CONTROL VALVE - REPAIR (Cont’d) d. Remove gerotor housing (4) and star (5). Do not drop star (5). e. Remove and discard seal (6) from gerotor housing (4). f. Remove spacer (7). g. Remove drive (8). h. Remove spacer plate (9). i. Remove and discard seal (10) from valve housing (11). j. Reverse valve housing (11) by turning over and reclamp. Remove ring (12). k. Remove seal gland bushing (13). l. Remove quad ring seal (14) and seal (15). m.    Remove two bearing races (16) and thrust bearing (17). n. Remove items 18, 19, and 20 as an assembly. o. Remove centering pin (18) from spool (19) and sleeve (20) assembly. CAUTION Do not bind spool (19) and sleeve (20) in valve housing (11). Failure to follow this precaution will cause part damage. p. Push spool (19) out of sleeve (20). Rotate spool (19) slowly to remove it from housing (11). q. Remove centering springs (21) if necessary. r. Remove and discard seal (22). 12-9