| |
TM 10-3930-660-34
9-3. REAR AXLE ASSEMBLY - REPLACE/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning
d. Inspection
e. Assembly
f. Installation
Initial Setup
Tools
Materials/Parts
Tool Kit, Automotive Mechanics
Container
Gear Oil (App. B, Item 32)
Shop Equipment, Automotive
Lint-Free Rags (App. B, Item 38)
Maintenance, Common #2 Less Power
Locknut (4)
Tags (App. B, Item 52)
Shop Equipment, Automotive
Wood Blocks
Maintenance and Repair; Field
Maintenance, Basic, Less Power
Personnel Required
Two Personnel
Floor Jack, 10 Ton
Two Jackstands, 40 Inch Height
Capacity, 7000 Lb. Minimum Capacity
Cap and Plug Set
Equipment Condition
Rear propeller shaft removed,
TM10-3930-660-20.
Rear wheel assemblies removed,
TM10-3930-660-20.
Rear disc brake assemblies
removed, para. 10-3.
Counterweight removed,
TM10-3930-660-20.
REMOVAL
1.
DISCONNECT AXLE BREATHER HOSE (1) FROM
FRAME.
CAUTION
Wipe area clean around all hydraulic connections to be
opened during removal. Cap oil lines and plug holes
after removing lines. Contamination of the hydraulic
system could result in premature failure.
9-3
|
