TM 10-3930-660-34 8-5.  FRONT DIFFERENTIAL CARRIER ASSEMBLY - REPLACE/REPAIR/ADJUST (Cont’d) e. Carefully    push    differential    carrier    (2)    into position.    Tighten  four  capscrews  (7)  two  or three  turns  each  in  a  pattern  opposite  each other. NOTE Torque   capscrews   (7)   in   pairs   on   opposing   sides   of differential carrier (2). f. Torque capscrews (7) to between 50 and 75 lb.    ft.    Torque  in  pairs  across  from  each other. g. Install   remaining   eight   capscrews   (7),   two capscrews    (9),    two    capscrews    (10),    four flatwashers (11) and eight flatwashers (8).Be sure   fasteners   are   in   correct   location   as noted during disassembly. h. Install axle shafts (1) into axle housing (3). i. Carefully tip axle housing (3) upright. 2. INSTALL  FRONT  PLANETARY  WHEEL  ENDS, PARA.  8-6. 3. FILL AXLE HOUSING WITH LUBRICANT, TM10- 3930-660-20. 4. INSTALL    WHEEL    ASSEMBLIES,    TM10-3930- 660-20. 5. INSTALL FRONT AXLE ASSEMBLY ON VEHICLE,  PARA.  8-3. 8-32