TM10-3930-660-34 8-3.  FRONT AXLE ASSEMBLY - REPLACE/REPAIR This task covers: a. Removal c. Cleaning e. Assembly b. Disassembly d. Inspection f. Installation INITIAL SETUP: Tools Materials/Parts Tool Kit, Automotive Mechanics Gear Oil Lubrication (App B, Item 32) Shop Equipment, Automotive Lint-Free rags (App B, Item 38) Maintenance, Common #2, Less Power Locknut (8) Shop Equipment, Automotive Tags (App B, Item 52) Maintenance and Repair; Field Wood Blocks Maintenance, Basic, Less Power Cap and Plug Set Personnel Required Two Personnel Equipment Condition vehicle parked on level service Parking brake set Rear wheels choked 1. PLACE WOOD BLOCKS (3 INCHES THICK) BETWEEN FRAME PADS (1) ON REAR AXLE AND FRAME TILT STOP PADS (2). THIS WILL PREVENT FRAME FROM TILTING WHEN REMOVING FRONT TILT CYLINDERS. 2. START ENGINE AND RAISE BOOM FOR SUFFICIENT WORK CLEARANCE. 3. DISCONNECT PARKING BRAKE CABLE, TM10-3930-660-20. 4. REMOVE FRONT PROPELLER SHAFT, TM10-3930-660-20. 5.     RAISE FRONT OF VEHICLE 8 INCHES OFF GROUND AND SUPPORT UNDER FRAME, TM10-3930-660-20. 8-3