TM10-3930-660-34 7-8.  TRANSMISSION CONTROL VALVE - REPLACE/REPAIR (Cont’d) j. Remove stem assembly (23) (range selector spool). k.   Remove cap (24). Remove and discard O- Ring (25). L.   Remove nut (26) and spacer (27). M. Remove stem (28) (directional spool). Remove and discard oil seal (29). N.  Remove plug (30). Remove and discard O- ring (31). O.  Remove dump valve spring (32) and dump valve (33). P.  Depress accumulator piston (34) and remove roller (35). Q.  Remove plug (36). Remove and discard O- ring (37). R.  Remove snap ring (38), orifice plate (39), spool (40) and shims (41) from end of valve body (42). S.  Remove accumulator piston (34), accumulator spring (43) and washer (44) from other end of valve body. T.   Remove eight plugs (45) and one ball (46) if necessary. CLEANING See Cleaning Instructions, para. 2-10. INSPECTION See Inspection Instructions, para. 2-11. 7-51