TM10-3930-660-34 7-4. TRANSMISSION ASSEMBLY - REPLACE/REPAIR (Cont’d) 9. INSTALL    TRANSMISSION    OIL    FILLER    TUBE (122). 10. CONNECT LEAD (20) TO TRANSMISSION TEMPERATURE SENDER. 11. INSTALL   A   NEW   TIE   WRAP   (19)   TO   UPPER HOSES THAT CONNECT HYDRAULIC CONTROL    VALVE    TO    TRANSMISSION    AND HYDRAULIC PUMPS. NOTE Remove caps and plugs as hoses are installed.  Wipe all sealing  surfaces  on  transmission  and  hoses  clean  and dry.    Apply  film  of  clean  transmission  oil  as  they  are installed. 12. CONNECT HOSES (16-18). a. Connect   two    transmission    oil    filter    hoses    (18)    on transmission. b. Connect   two   transmission   oil   cooler   hoses   (17)   on transmission. c. Connect  transmission  disconnect  valve  hose  (16)  to transmission control valve. 7-34