TM10-3930-660-34 7-3. TORQUE CORTBR - REPLACE/REPAIR (Cont’d) d. Install new O-ring (25) on front cover (16). e. Align   marks   made   at   disassembly   between front cover (16) and impeller (17).  Install front cover (16). f. Apply  Loctite  #222  to  threads  of  capscrews (20).    Install  twenty  capscrews  (20),    twenty flatwashers   (19)   and   twenty   hex   nuts   (18). Torque capscrews (20) to 25 lb.  ft. g. Install    converter    input    shaft    (15).        Apply Loctite   #262   to   threads   of   capscrews   (13). Install    twelve    new    lockwashers    (14)    and twelve   capscrews   (13).      Torque   capscrews (13) to 30 lb.  ft. 4. INSTALL PARTS (9-12) IN FRONT HOUSING (7). a. If removal was necessary,  install grease fitting (12). b. Install oil seal (11),  bearing (10) and snap ring (9). INSTALLATION 1. INSTALL TORQUE CONVERTER ASSEMBLY(8) IN TRANSMISSION HOUSING. 2. INSTALL    FRONT    HOUSING    (7),        TWELVE CAPSCREWS   (6),   TWELVE   STARWASHERS (5) AND TWELVE HEX NUTS (4). 3. INSTALL YOKE (3),  WASHER (2) AND NUT (1).  TORQUE NUT (1) TO 300-350 LB.  FT. 4. INSTALL TRANSMISSION OUTPUT SHAFT, PARA.  7-6. 7-7