TM10-3930-660-34 6-8. MAIN WIRING HAESS - REPLACE (Cont’d) INSTALLATION 1. SECURE MAIN WIRE HARNESS (23) WITH FOUR CABLE CLAMPS (18), FOUR NEW LOCKWASHERS (17), FOUR NUTS (16) AND FOUR CAPSCREWS (15). 2. INSERT WIRE HARNESS BRANCHES THROUGH HOLES IN FRAME AND INSTALL FOUR GROMMETS (19). 3. CONNECT CONNECTORS (20, 21 AND 22) TO ORIGINAL LOCATIONS. 4.   CONNECT GROUND TERMINAL RINGS (6 AND 7), INSTALL FIVE NUTS (12), FIVE NEW LOCKWASHERS (13) AND FIVE FLATWASHERS (14). 5.   CONNECT FOUR TERMINAL RINGS (4), TWO TERMINAL RINGS (5), EIGHT TERMINAL RINGS (6), TERMINAL RING (7), TWELVE TERMINAL RINGS (8), TERMINAL RING (9), TERMINAL RING(10), TERMINAL RING (11) AND TERMINAL RING (24) TO DEVICES INDICATED. 6. PLUG IN 25 MALE CONNECTORS (1), THREE SPADE TERMINALS (2) AND FEMALE RECEPTACLE (3) TO DEVICES INDICATED. 7. CONNECT NEGATIVE BATTERY CABLE, TM10-3930-660-20. 6-32