TM10-3930-660-34 4-6. TURBOCHARGER ASSEMBLY - REPAIR (Cont’d) NOTE Threads on locknut (9) are left-handed. Turn locknut (9) clockwise to remove. 6.  REMOVE LOCKNUT (9),  AND COMPRESSOR IMPELLER (10).  DISCARD LOCKNUT (9). 7.  REMOVE FOUR CAPSCREWS (11) AND TWO LOCK PLATES (12).  DISCARD LOCK PLATES (12). 8.  REMOVE DIFFUSER (13) AND DIFFUSER SEAL (14).DISCARD SEAL (14). 9.  REMOVE OIL SLINGER (15) AND SPLIT RING SEAL (16) AS AN ASSEMBLY FROM THE DIFFUSER (13). 10.  REMOVE SPLIT RING SEAL (16) FROM OIL SLINGER (15).DISCARD SPLIT RING SEAL (16). 11.  REMOVE OIL BAFFLE (17). 12.  REMOVE THREE CAPSCREWS (18) AND THRUST BEARING (19).  DISCARD THRUST BEARING (19) AND CAPSCREWS (18). 13.  REMOVE THRUST COLLAR (20). 14.  REMOVE FOUR CAPSCREWS (21),  TWO LOCK PLATES (22) AND CLAMPING PLATE (23).  DISCARD LOCK PLATES (22) AND CAPSCREWS (21). 15.  REMOVE BEARING HOUSING (2) FROM TURBINE HOUSING (3). 16.  REMOVE SHAFT AND WHEEL (24) AND HEAT SHIELD (25) FROM BEARING HOUSING (2) AS AN ASSEMBLY. 17.  REMOVE HEAT SHIELD (25) FROM SHAFT AND WHEEL (24). 18.  REMOVE SPLIT RING SEAL (26) FROM SHAFT AND WHEEL (24).  DISCARD SPLIT RING SEAL (26). 4-17