TM 10-3930-660-34 3-23.  ENGINE OIL COOLER AND FILTER BASE - REPLACE (Cont’d) 5. IF NECESSARY, USE A SCREWDRIVER TO REMOVE BYPASS VALVE (12) FROM BACK OF FILTER HEAD (5). CLEANING See Cleaning Instructions, para. 2-10. INSPECTION See Inspection Instructions, para. 2-11. INSTALLATION 1. IF REMOVAL WAS NECESSARY, PROPERLYINSTALL BYPASS VALVE (12) INTO BACK OF FILTER HEAD (5) WITH A MALLET AND SUITABLE DRIVER. 2. INSTALL NEW COOLER GASKET (11), COOLER CORE (10), NEW FILTER HEAD GASKET (9) AND FILTER HEAD (5). 3. INSTALL FOURTEEN CAPSCREWS (8) AND TORQUE TO 216 IN. LB. 4. CONNECT TURBOCHARGER SUPPLY LINE (6) TO TOP OF FILTER HEAD (5). a.   If removed, apply Loctite #59241 to threads of adapter (7). Install adapter (7). b.   Connect turbocharger supply line (6) to adapter (7). 5. IF REMOVED, INSTALL PLUNGER (4), COMPRESSION SPRING (3), NEW O-RING (2), AND PLUG (1). TIGHTEN PLUG TO 60 LB. FT. 6. INSTALL OIL FILTER, TM 10-3930-660-20. 7. FILL COOLING SYSTEM, TM 10-3930-660-20. 3-131/(3-132 Blank)