TM 10-3930-660-34 3-21. ENGINE OIL PUMP INLET TUBE - REPLACE This task covers: a. Removal b. Cleaning c. Inspection d. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Gasket (2, 8) K&W Copper Coat Sealant (App. B, Item 14) Shop Equipment, Automotive Lint-Free Rags (App. B, Item 38) Maintenance, Common #2 Less Oil Pan Gasket (2) Power Equipment Condition Engine oil drained, LO10-3930-660-12. Negative battery cable disconnected, TM 10-3930-660-20. REMOVAL 1. REMOVE OIL PAN (1) AND OIL PAN GASKET (2) BY REMOVING THIRTY-SIX CAPSCREWS (3) AND SPECIAL WASHERS (4). DISCARD GASKET (2). 2. REMOVE TWO CAPSCREWS (5) AND ONE CAPSCREW (6) WHICH RETAIN OIL PUMP INLET TUBE (7). 3. REMOVE OIL PUMP INLET TUBE (7) AND GASKET (8).  DISCARD GASKET (8). CLEANING See Cleaning Instructions, para. 2-10. INSPECTION See Inspection Instructions, para. 2-11. INSTALLATION 1. INSTALL NEW GASKET (8). 2. INSTALL OIL PUMP INLET TUBE (7) AND RETAIN WITH TWO CAPSCREWS (5) AND ONE CAPSCREW (6). TIGHTEN CAPSCREWS TO 216 IN. LB. 3-124