TM 10-3930-660-34 3-19.  FRONT HOUSING AND COVER - REPLACE/REPAIR (Cont’d) 2. REMOVE LONG CAPSCREW (3) AND BELT GUIDE (4). 3. REMOVE EIGHT CAPSCREWS (5) AND ELEVENSHORT CAPSCREWS (6) FROM GEAR COVER (7). 4. REMOVE GEAR COVER (7) AND GASKET (8). DISCARD GASKET (8). 5. REMOVE CAMSHAFT AND TIMING GEAR, PARA. 3-18. 6. REMOVE FUEL INJECTION PUMP, PARA. 4-4. 7. REMOVE TWO CAPSCREWS (5) AND FIVE SHORT CAPSCREWS (6) FROM GEAR HOUSING (9). 8. REMOVE GEAR HOUSING (9) AND GASKET (10). DISCARD GASKET (10). 9. USE A GASKET SCRAPER TO REMOVE OLD GASKET MATERIAL FROM CYLINDER BLOCK (11) AND GEAR HOUSING (9). DISASSEMBLY 1. IF NECESSARY, REMOVE OIL SEAL (12) FROM GEAR COVER (7) WITH A SUITABLE PULLER OR DRIVER. 2. REMOVE TWO CAPSCREWS (13) WHICH RETAIN THE TIMING PIN HOUSING (14). 3. REMOVE TIMING PIN (15) AND HOUSING (14) AS AN ASSEMBLY. 4. REMOVE RECTANGULAR RING SEAL (16) FROM HOUSING (14). DISCARD RECTANGULAR RING SEAL (16). 5. REMOVE RETAINING RING (17) FROM HOUSING (14). 6. REMOVE TIMING PIN (15) FROM HOUSING (14). 7. REMOVE O-RING (18). DISCARD O-RING (18). 3-118