| |
TM 10-3930-660-34
3-7.
CYLINDER HEAD ASSEMBLY - REPLACE/REPAIR
(Cont’d)
c.
Tighten cylinder head capscrews (4 and 5) and
the rocker lever pedestal M12 capscrews
in the sequence shown to the final torque
value in three steps.
d. Tighten rocker lever pedestal M8 capscrews to 18 lb.
ft.
5. ADJUST VALVES, TM10-3930-660-20.
6. INSTALL ROCKER ARM COVERS,
TM10-3930-660-20.
7. INSTALL TOP RADIATOR MOUNT (3).
Apply Loctite #242 to threads of capscrews(l). Install top
radiator mount (3), and three new lockwashers (2) and
capscrews (1).
8. CONNECT HEATER HOSES TO ENGINE, TM10-3930-
660-20.
9. INSTALL FUEL FILTER, TM10-3930-660-20.
10.INSTALL EXHAUST MANIFOLD, TM10-3930-660-
11.INSTALL FUEL INJECTOR NOZZLES, PARA. 4-3.
12.INSTALL HIGH PRESSURE, SUPPLY, AND DRAIN
FUEL LINES, TM10-3930-660-20.
13.INSTALL AIR CLEANER, TM10-3930-660-20.
14.INSTALL RADIATOR, TM10-3930-660-20.
15.INSTALL ENGINE COVERS, TM10-3930-660-20.
16.SERVICE ENGINE WITH LUBRICATING OIL, TM10-3930-660-20.
3-50
Step Torque Value
1...........................................................................
29 lb. ft.
2...........................................................................
62 lb. ft.
3...........................................................................
92 lb. ft.
|
