 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FRAME ASSEMBLY MAINTENANCE - CONTINUED
0301 00
DISASSEMBLY - CONTINUED
8.
Break welds attaching hinge (7) to frame (4).
9.
Remove hinge (7) and discard.
WARNING
Eye protection must be worn when performing maintenance where components or particles could fly out dur-
ing procedure. Failure to take precautions could cause injury to personnel.
Some components are under spring tension. Wear eye protection and use caution when disassembling them, to
avoid injury.
10.
Use a grinder or file to remove old weld material from
frame (4).
11.
Remove boom (WP 0262 00).
12.
Use a hammer and suitable driver to remove bushing
(8) from boom pivot pin hole (11).
13.
Discard bushing (8).
32
1
8
11
4
9
5
6
10
7
409-1351
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
ASSEMBLY
1.
Use a hammer and suitable driver to install new self-aligning bushing (8).
2.
Install boom (WP 0262 00).
0301 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals