 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION INPUT SHAFT MAINTENANCE - CONTINUED
0292 00
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
ASSEMBLY
1.
Install bearing retainer (15) on input shaft (11). Ensure that flat side of bearing retainer (15) faces away from input shaft
(11) gear.
2.
Install ball bearing (14) and snap ring (13).
3.
Install new seal ring (12).
INSTALLATION
NOTE
When installing capscrews, apply loctite.
Install input shaft as an assembly.
1.
Apply grease to new seal ring (12) to center it on input shaft (11).
2.
Install input shaft (11) through bore in back of front cover assembly (1). Ensure that bearing retainer (15) is placed with
flat side against front cover (1).
3.
Apply loctite to threads of three capscrews (10) and install.
0292 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals