 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
CRANKSHAFT MAINTENANCE - CONTINUED
0271 00
INSTALLATION - CONTINUED
Step
Torque Value
1
44 lb-ft (60 Nm)
2
88 lb-ft (119 Nm)
3
129 lb-ft (175 Nm)
12.
Remove all capscrews (12) and bearing caps (13).
13.
Remove and measure plastigage. Main bearing clear-
ance must not exceed 0.00474 in (0.12039 mm). If
bearing clearance exceeds clearance measurement, use
appropriate oversize bearings.
14.
Remove lower bearing halves (15) from bearing caps
(13).
15.
Lift crankshaft (14) from cylinder block far enough to
remove upper bearing halves (17) and thrust bearing
(18). Be careful that connecting rods do not scratch
crankshaft.
17
18
14
16
13
15
12
409-903
0271 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals