 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
BOOM EXTEND CYLINDER REPLACEMENT - CONTINUED
0269 00
INSTALLATION - CONTINUED
NOTE
Apply anti-seize compound to shaft as installed.
6.
Install two spacers (8), one spacer (7), shaft (6) and
17,18
snap ring (5).
4
7.
Place wood blocks underneath boom extend cylinder
and inner boom.
8.
Remove hoist and sling from back of extend cylinder.
9.
Install eight hex head capscrews (15) and eight new
locknuts (16) to secure extend cylinder anchor (17).
15,16
NOTE
9,10,11
Attach a hoist with sling at front of inner
13
boom if mounting holes between outer
12
boom and extend cylinder anchor do not
14
align. Move inner boom as needed to align
1,2
mounting holes.
10.
Remove wood blocks underneath boom extend cylin-
3
der and inner boom.
NOTE
When installing capscrews, apply loctite
on threads.
11.
Connect two hoses (4) to extend cylinder.
12.
Install pulley (13) with bracket (12).
13.
Remove two hex head capscrews (9), two flatwashers
(11) and two new lockwashers (10) that held boom
wear pad (14) in place.
409-1443
14.
Apply loctite on threads of capscrews (9) and reinstall
them and flatwashers (11) to secure bracket (12).
15.
Adjust host and cable tension (WP 0194 00).
16.
Install cover (3), four new lockwashers (2) and four hex head capscrews (1).
17.
Operate boom, check for proper operation and leaks (TM 10-3930-660-10).
END OF WORK PACKAGE
0269 00-5/(-6 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals