 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
OUTER BOOM MAINTENANCE - CONTINUED
0264 00
DISASSEMBLY
1.
If necessary, remove three lines (4) from underside of outer boom (3).
NOTE
Lines are not interchangeable. Note location of each line for use during installation.
2.
Remove two capscrews (16), two lockwashers (17)
3
and one clamp cover (18) from each pair of clamp
19
halves (19). Discard lockwashers. Note location and
orientation of clamp halves (19) for use during instal-
lation.
4
3.
Remove three capscrews (20), three lockwashers (21)
and one clamp cover (22), from each pair of clamp
19
halves (23). Discard lockwasher. Note location and
orientation of clamp halves (23) for use during instal-
18
lation.
17
4.
Remove three lines (4) from underside of outer boom
23
(3).
16
22
20
21
409-1430
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
ASSEMBLY
NOTE
Lines are not interchangeable. Install lines in locations noted during removal.
1.
Position three lines (4) on underside of outer boom (3).
NOTE
Apply loctite to capscrews as installed.
2.
Install one clamp cover (22), three new lockwashers (21) and three capscrews (20) to each pair of clamp halves (23).
Ensure that clamp halves (23) are positioned as noted during disassembly.
3.
Install one clamp cover (18), two new lockwashers (17) and two capscrews (16) to each pair of clamp halves (19).
Ensure that clamp halves (19) are positioned as noted during disassembly.
0264 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals