 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
DISC BRAKE ASSEMBLY MAINTENANCE - CONTINUED
0249 00
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on disc brake clean and dry.
1.
Position disc brake (4) on disc.
2.
Check proper location of disc brake in relation with the disc.
3.
Verify that disc is centered between disc brake hous-
ing.
4.
Apply loctite on capscrew (2) threads install four
1
washers (3) and four capscrews (2). Torque capscrews
2,3
to 280 lb-ft (380 Nm).
4
2,3
409-1322
5.
Install brake pads (WP 0130 00).
6.
Check to see that brake pads are free to move.
7.
Connect line (1) to brake housing.
8.
Bleed air from brakes (WP 0129 00).
9.
Install tire assembly (WP 0134 00).
10.
Operate vehicle and check for proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE
0249 00-5/(-6 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals