 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
DISC BRAKE ASSEMBLY MAINTENANCE - CONTINUED
0249 00
REMOVAL
1.
Disconnect line (1) from brake housing.
2.
Remove four capscrews (2) and four washers (3).
3.
Remove disc brake (4).
4.
Repeat steps 1 thru 3 for other disc brakes.
1
2,3
4
2,3
409-1322
DISASSEMBLY
1.
Use a C-clamp to hold a wood block against the two
C-CLAMP
pistons (5) on mounting side of housing (6).
5
6
2.
Use compressed air at inlet fitting (15) to force pistons
(7) out of housing (6). Place a piece of wood in front
of the piston (7) that comes out first so other piston
will be forced out.
15
AIR GUN
WOOD BLOCK
7
409-1323
WARNING
Do not put hands in front of the pistons when forcing out the pistons. Failure to follow this precaution
could result in severe personal injury.
Do not exceed 30 psi (207 kPa) nozzle pressure. Always wear safety glasses. Do not direct compressed
air against human skin. Failure to follow these instructions may result in serious injury or death.
0249 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals