 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TRANSMISSION ASSEMBLY REPLACEMENT - CONTINUED
0237 00
INSTALLATION - CONTINUED
29.
Connect lead (7) to transmission temperature switch (8).
30.
Connect shafts (3 and 6) on transmission.
31.
Apply loctite on threads of capscrews (4). Install rear propeller shaft (6) and secure with four new lockwashers (5) and
four capscrews. Torque capscrews to 45 lb-ft (61 Nm).
32.
Apply loctite on threads of capscrews (1). Install front propeller shaft (3) and secure with four new lockwashers (2) and
four capscrews. Torque capscrews to 45 lb-ft (61 Nm).
4,5
3
7
6
409-1203
1,2
409-1204
33.
Ensure that transmission drain plug is in position.
34.
Service transmission (WP 0118 00).
CAUTION
Do not start engine until both piston and tandem gear pumps are primed. Failure to follow this instruction
may result in damage to pumps.
35.
Purge air (prime) from piston and tandem gear pumps (WP 0173 00).
36.
Start engine and allow to run for several minutes (TM 10-3930-660-10).
37.
Shut engine down and check for leaks (TM 10-3930-660-10). Check fluid level and refill as necessary (TM 10-3930-
660-10).
38.
Install transmission cover (WP 0150 00).
END OF WORK PACKAGE
0237 00-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals