TESTING AND ADJUSTMENT OF JOYSTICK "THRESHOLD" AND "MAX OUT" SETTINGS

TM 10-3930-660-24-2

ELECTRIC JOYSTICK MAINTENANCE - CONTINUED

0235 00

TESTING AND ADJUSTMENT OF JOYSTICK "THRESHOLD" AND "MAX OUT" SETTINGS - CONTINUED

NOTE

During step 43 turn max out control counterclockwise to lower ammeter reading and clockwise to raise

ammeter reading.

43.

If reading in step 42 was not within limits of 600 to

640 mA, adjust max out control (34) and repeat step

42 until ammeter reads approximately 620 mA.

32 33

409-1133

44.

Turn starter switch off (TM 10-3930-660-10).

45.

Disconnect leads of ammeter. Secure electrical lead no. 56 to terminal B of bottom circuit board (22) with screw (35).

46.

Repeat steps 25 thru 45 and check that current readings are still within limits. Readjust threshold (33) and max out (34)

controls as required.

47.

Secure plate (24) with four capscrews (23).

409-1129

409-1134

48.

Operate joystick and check for proper operation (TM 10-3930-660-10).

END OF WORK PACKAGE

0235 00-8