 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FUEL SHUTOFF SOLENOID REPLACEMENT (165 HP) - CONTINUED
0227 00
NOTE
Perform step 5 if vehicle is equipped with new fuel shutoff solenoid.
5.
Remove two screws (11) and fuel shutoff solenoid (4) from side of fuel injection pump (9) and threaded stud (8).
5
2
9
11
4
8
6
409-4095
7
NEW DESIGN SOLENIOD (WITHOUT BRACKET)
INSTALLATION
NOTE
Perform steps 1, 4 and 5 to install new fuel shutoff solenoid to vehicle.
1.
Install fuel shutoff solenoid (4) to side of fuel injection pump (9) and threaded stud (8) with two screws (11).
NOTE
Perform steps 2 and 3 to install original fuel shutoff solenoid, which includes a separate bracket.
2.
Install bracket (12) to side of fuel injection pump (9) with three screws (11).
3.
Install fuel shutoff solenoid (3) to bracket (12) and threaded stud (8) with two screws (10).
4.
Install washer (7), if equipped, and new locknut (6) to threaded stud (8).
5.
Connect connector (1 or 2) of fuel shutoff solenoid (3 or 4) to connector (5) of engine wiring harness.
6.
Connect battery cables (WP 0107 00).
7.
Operate engine and check for proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE
0227 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals