|
|
TM 10-3930-660-24-2
FUEL INJECTOR PUMP REPLACEMENT (152 HP) - CONTINUED
0224 00
REMOVAL - CONTINUED
NOTE
Steps 12 thru 14 must be performed in order to time fuel injection pump to engine when pump is installed.
12.
Locate TDC for cylinder no. 1 by slowly turning
engine crankshaft while pushing in on TDC pin (22).
Pin will fit into a hole on the camshaft gear when
engine is at TDC for cylinder no. 1.
13.
Disengage TDC pin (22) immediately after locating
TDC for cylinder no. 1 to prevent damage to pin.
22
409-1059
14.
Loosen screw (23) and remove timing lock plate (24).
Tighten screw (23) against fuel injection pump shaft.
Secure timing lock plate (24) to fuel injection pump
with a wire to prevent its loss.
15.
Remove front cover (WP 0280 00).
24
23 409-1061
16.
Hold crankshaft to prevent locked fuel injection pump from turning while loosening nut (25).
17.
Use care not to drop nut (25) or lockwasher (26)
25,26
behind front cover. Remove nut (25) and lockwasher
(26). Discard lockwasher.
409-1063
0224 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |