 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0213 00
REMOVAL - CONTINUED
2.
Remove 14 capscrews (4) and six capscrews (5) from cylinder head (6). Working from center to ends of cylinder head.
3.
Attach lifting chains and hoist to engine lifting brack-
4
ets. The cylinder head weighs approximately 114 lb
5
(52 kg).
6
WARNING
Lifting equipment used for lifting machine
must be in good condition and of suitable
load capacity. Failure to follow this warn-
7
ing may cause injury or death, or damage
to equipment.
409-4089
CAUTION
Do not lower cylinder head onto a flat surface, this could damage the valves.
4.
Slowly and carefully lift the cylinder head from the cylinder block and place it on a suitable stand or platform that will
support the bottom perimeter of the cylinder head.
5.
Remove and discard cylinder head gasket (7).
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
0213 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals