 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
ENGINE ASSEMBLY REPLACEMENT (152 HP) - CONTINUED
0209 00
INSTALLATION - CONTINUED
49.
Install driveshaft assembly (1) to engine dampener (7).
50.
Position engine coupling (9) with driveshaft assembly
(1) into engine dampener (7).
9
8
51.
Apply loctite to three capscrews (8) and install cou-
2
7
pling (9) to engine with capscrews. Torque capscrews
3,4
to 25 lb-ft (34 Nm).
52.
Position drive assembly (1) to transmission (2).
53.
Apply loctite to four capscrews (3). Install universal
joint (5) of shaft assembly (1) to input yoke (6) of
transmission (2) with four capscrews and four new
lockwashers (4). Torque capscrews to 41 lb-ft (56
Nm).
1
5
6
409-842
54.
Install tie down straps to lines and electrical wires at areas noted during engine removal, and as necessary to prevent
damage to lines and wires.
55.
Install muffler (WP 0051 00).
56.
Install radiator (WP 0053 00).
57.
Service cooling system with coolant (WP 0053 00).
58.
Service engine with engine oil (WP 0012 00).
59.
Connect battery cables (WP 0107 00).
60.
Adjust accelerator cable (WP 0048 00).
61.
Run engine, check for proper operation and leaks (TM 10-3930-660-10).
62.
Install transmission cover (WP 0150 00).
END OF WORK PACKAGE
0209 00-26
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals