 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
FRAME TILT VALVE REPLACEMENT - CONTINUED
0180 00
REMOVAL - CONTINUED
6.
Remove four screws (9) and lockwashers (10) to remove valve (4) from cover (2). Discard lockwashers.
7.
Remove two adapters (11), adapter (12) and elbow
(13) from valve (4).
12
INSTALLATION
NOTE
Remove caps and plugs as hoses are
installed. Wipe all sealing surfaces on
11
4
valve and hoses clean and dry.
1.
Install elbow (13), two adapters (11) and adapter (12)
13
11
to valve (4).
NOTE
Apply loctite to screws as installed.
409-680
2.
Position valve (4) on cover (2) and secure with four
new lockwashers (10) and four screws (11).
3.
Install handle (8) to valve (4) with nut (6) and washer (7).
4.
Install knob (5) onto end of handle (8).
5.
Connect four hoses (3) as tagged to valve (4).
NOTE
Apply loctite to threads of capscrews.
6.
Lower cover (2) and install to cab with four capscrews (1).
7.
Bleed air from system by operating frame tilt function five times (TM 10-3930-660-10).
END OF WORK PACKAGE
0180 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals