 |
|||
|
|
|||
|
Page Title:
PURGING AIR FROM PISTON PUMP AND TANDEM GEAR PUMP - CONTINUED |
|
||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HYDRAULIC SYSTEM MAINTENANCE - CONTINUED
0172 00
PURGING AIR FROM PISTON PUMP AND TANDEM GEAR PUMP - CONTINUED
NOTE
Place container under pump to catch any oil lost during purging process.
8.
Place auxiliary fuel shut-off switch in the OFF position (TM 10-3930-660-10).
NOTE
A solid stream will flow out of both loosened hoses when air is purged from pump.
9.
Crank engine until solid stream of fluid is flowing from both hoses (6 and 8). While continuing to crank engine, have
assistant tighten hoses (6 and 8).
10.
Stop cranking engine. Place auxiliary fuel shut-off
switch in the ON position (TM 10-3930-660-10).
NOTE
If pump will not pump oil after purging,
further troubleshooting is required (WP
8
9
11.
Check hydraulic oil level, fill hydraulic reservoir as
required, and check for leaks (TM 10-3930-660-10).
6
5
12.
Install transmission cover (WP 0150 00).
7
B
A
409-637
END OF WORK PACKAGE
0172 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals